Programming the Beepwear pager.

The Beepwear pager requires the standard Motorola pager interface, the Beepwear uses all 4 wires
(TX,RX,+1.5v and GND). The programming cradle has 4 pins that make contact with the gold pads
below the battery. Pictures of the cradle can be seen from the pictures section.

The current software package can program all 3 series of beepwear and is version 1.00.35 for the
original beepwear (series 817) and 1.00.06 for the Beepwear (series 806) and the BeepwearPro
(series 816) with FLEXtime. The software is trademark of LLC (the joint venture between Timex
and Motorola) and as such has no Motorola part #.

The pager of course supports passwords however there does not appear to be a maximum # of tries limitation.

The software appears to be extremely difficult to come by :(
I will add more and hopefully format this
page further as time permits. Any questions, comments or information regarding the Beepwear can be sent to me at
beepwear@beeped.com. 

<UL>
<UL>

<img src="beep.jpg">